LOCKOUT
/ TAGOUT AND THE CONTROL OF HAZARDOUS ENERGY SOURCES
MT721 (10 min, Eng, Spn, VHS / DVD $89.95) Online Preview
Click Here
Lockout
/ Tagout is a vital safety procedure which is used in
industry and research environments to ensure that potentially
dangerous machines and equipment are properly shut off
and de-energized prior to maintenance, set-up or service.
Lockout / Tagout procedures not only protect authorized
maintenance employees from harm, but also any affected
employees that work on or near the machine or equipment
while it is undergoing servicing or repair. Lockout /
Tagout helps prevent serious workplace injuries, and is
required by OSHA.
Our
DVD and VHS release “Lockout / Tagout and the Control
of Hazardous Energy Sources” covers the following
important topics:
Definition
of Lockout / Tagout
Types
of hazardous energy sources
The
purpose of lockout / tagout
Lockout
/ tagout procedures
Use
of multiple locks and tags
Locking
out "plug in only" equipment
Definition
of authorized vs affected employees
This
training program is intended to assist employers in promoting
safe work practices and complying with OSHA requirements.
For
a limited time a VHS or DVD of “Lockout / Tagout
and the Control of Hazardous Enrgy Sources” is only
$89.95*
To
Order a Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
*See
Home Page for expiration date
(regular price VHS/DVD $125.00)
**These
DV-D-R recordings are created using the latest in DVD
replicating equipment.They should work on all newer DVD
players and DVD players that play back using either progressive
scan or have been rated to play DVD-R. May not work with
some older DVD player and computers.
THE
Hand and Power Tool Safety Program for Your Company!
BASIC
HAND AND POWER TOOL SAFETY
MT752 (12 min, Eng, Spn, VHS / DVD $89.95) Online Preview
Click Here
Statistics
tell us that hand and power tools are involved in thousands
of accidents and injuries every year. Many of them are
serious, some even fatal. The purpose of this training
program is to provide a basic overview of the common hand
and power tools that are found in workplaces, workshops
and garages around the world. Employee awareness of potential
hazards combined with following proper safety procedures
can reduce accidents and injuries dramatically.
Our
DVD and VHS release “Basic Hand and Power Tool Safety”
covers the following important topics:
Proper
dress code
Personal
protective equipment
Common
hand tools
Electrical
safety review
Power
saws
Drill
presses, and more
This
training program is intended to assist employers in promoting
safe work practices and complying with OSHA training requirements.
Preventing hand and power tool related accidents and injuries
is a goal that everyone wants to achieve.
For
a limited time a VHS or DVD of “Basic Hand and Power
Tool Safety” is
only $89.95*
To
Order a Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
*See
Home Page for expiration date
(regular price VHS/DVD $125.00)
**These
DV-D-R recordings are created using the latest in DVD
replicating equipment.They should work on all newer DVD
players and DVD players that play back using either progressive
scan or have been rated to play DVD-R. May not work with
some older DVD player and computers.
MAINTENANCE
PERSON SAFETY
MT727 (14 Min, Eng, Spn, VHS $160.00 / DVD $160.00)
To be sure your maintenance people are properly trained,
this program provides information on proper lockout/tagout
techniques, electrical safety, machine guarding, safe lifting
& much more! An excellent safety awareness tool for both new and experienced employees.
To Order a Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
MACHINE
GUARDING AND CONVEYORS
MT733 (12 Min, Eng, Spn, VHS $195.00 / DVD $195.00)
This program addresses the need for working safely & responsibly
around machine guarding, machinery with moving parts or conveyor
belts. This video is an important addition to your safety & training
library.
To Order a Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
CRANES,
CHAINS, SLINGS AND HOISTS
MT737 (12 Min, Eng, Spn, VHS $195.00 / DVD $195.00)
Training is essential for anyone operating cranes, chains, hoists
or slings. This program meets OSHA requirements and will help your
employees to maintain a safe & efficient workplace.
To Order a Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
SAFE
OPERATION OF OVERHEAD CRANES & HOISTS
MT741 (12 Min, Eng, Spn, VHS $195.00 / DVD $195.00)
This program is designed to educate and reinforce crane and hoist
operator responsibilities. Many safety tips including lifting/lowering
loads, signaling, inspections, rigging requirements, sling angles
and how to avoid accidents.
To Order a Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
GAS
WELDING SAFETY
CH523 (14 Min, Eng, Spn, VHS $160.00 / DVD $160.00)
Program explains cylinder connections, valves, "cracking" and basic
safety procedures when using Fuel Gas welding and cutting.
To Order a Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
ARC
WELDING SAFETY CH522 (11 Min, Eng, Spn, VHS $160.00 / DVD $160.00)
An excellent review of Arc Welding safety, safety hazards and health
hazards associated with this type of welding operations.
To Order a
Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
LOCKOUT / TAGOUT
FOR JANITORS AND CUSTODIANS
MT741 (10 Min, Eng, Spn, VHS $195.00 / DVD $195.00)
Lockout/Tagout is a basic principle of workplace safety that is
often ignored. Lockout/Tagout procedures and training are mandated
by OSHA. Employees in the janitorial or custodial industries have
potential exposure to conditions that can be controlled easily and
effectively through lockout / tagout.
To Order a Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
PORTABLE
GRINDERS AND ABRASIVE WHEELS
MT723 (12 Min, Eng, Spn, VHS $195.00 / DVD $195.00)
Grinders and abrasive wheels are some of the more common tools in
industry today yet they account for a disproportionately high percentage
of injuries on the job. Did you know that if improperly used a grinder
can explode with the force of a hand grenade! This video demonstrates
the proper procedures for safe use, care and maintenance of grinders
and abrasive wheels.
To Order a Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
MACHINE
GUARDING RESPONSIBILITY
CH526 (9 Min, Eng, Spn, VHS $195.00 / DVD $195.00)
Discusses control of hazaardous energy source (Lockout/Tagout) machine
guarding requirements and personal responsibility when working with
moving parts of machines.
To Order a Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
POWER
SAW SAFETY
MT739 (12 Min, Eng, Spn, VHS $160.00 / DVD $160.00)
Discusses electrical safety, grounding, power/extension cords, double
insulation 3 prong plugs, wires and an electrical safety overview
for the workplace.
To Order a Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
CUTTING
TORCH SAFETY
CH524 (10 Min, Eng, VHS $160.00 / DVD $160.00)
Program emphasizes valves, pressure guages, hoses, cylinders and
cutting operation safety. For anyone using or handling acetylene
torches.
To Order a Video
or DVD,
1) Click on the Shopping Cart Icon
HOT
WORK PERMITS CH530 (9 Min, Eng, VHS $195.00 / DVD $195.00)
Excellent training program and reinforcement for the need of Hot
Work Permits. Details what is required, purpose of HWP and how to
develop and use Hot Work Permits.
To Order a
Video or DVD,
1) Select Eng or Spn and
2) Click on the Shopping Cart Icon
SAFETY
IN THE MAINTENANCE DEPARTMENT, Part 1
MT750 (10 Min, Eng, VHS $195.00 / DVD $195.00)
This is the first part of an excellent training program for maintenance
persons, custodians, mechanics and others that work in maintenance
facilities. This videos covers Personal Protective equipment, hand
tools, wrenches, electrical tools, drilling & cutting, &
potential safety hazards.
To Order a Video or DVD,
1) Click on the Shopping Cart Icon
SAFETY
IN THE MAINTENANCE DEPARTMENT, Part 2
MT751 (16 Min, Eng, VHS $195.00 / DVD $195.00)
The second part of a 2 part series this video covers training in
lockout/tagout, confined spaces, fire prevention, ladder safety,
compressors, chemicals & hazardous materials MSDS & chemical
labeling. An excellent overview of each categoryand provides updated
or annual refresher training for persons working in maintenance.
To Order a Video or DVD,
1) Click on the Shopping Cart Icon
Download
Adobe Acrobat Reader 
